Modern faucets like Cartridge faucets, Disc Faucets, Pull-out faucets, etc. have gained immense popularity in almost all households. Though they have taken convenience to the next level, the process of installing such faucets has become more complicated than traditional taps. The root cause of several faucet problems is in the process of installing them.
If you poorly install your faucets, you would face several issues shortly. So even if you call a plumber to fix your faucet or do it on your own, you must ensure their proper installation. Any mistake in their installation can have an adverse effect on their overall performance.
Also, poor installation of kitchen faucets will hamper the durability of faucets and will cause you various issues. Here is a detailed article about the problems caused by the poor installation of kitchen faucets and also some tips and tricks on how to fix them.
Table of Contents
Problems and Causes of Poor Installation of Kitchen Faucets
Low Water Pressure
One of the most common problems caused by the poor installation of kitchen faucets is a decrease in water pressure. This problem is likely to arise if the valves are not installed correctly.
Sometimes, even the poor installation of pipes or inadequate water sources can cause the flow of water to decrease. So, make sure to find the underlying cause, only then take up necessary measures to fix it.
Leakage
Another common problem is leakage from the hose or the faucet itself.
The water leakage not only wastes water but can also get very irritating because of the constant dripping sound. You can temporarily fix this issue with the help of duct tape. However, if you want to fix it permanently, then you might want to check the installation of the hose as well as the faucet.
Poor installation is likely to cause this problem in new faucets. So, if you have recently bought or replaced your faucet but it has a leakage problem, you might want to reinstall it with the help of a professional.
Tangling of Hose
This problem is common in pull-out faucets. Improper installation of such faucets is likely to affect its hose. If the hose is not fixed correctly or is loose, you may notice the hose of your faucet being tangled easily.
Excessive Noise
This has got to be the most annoying problem caused by the poor installation of kitchen faucets. Any loose screws, improper installation of the handle, valve seats or hose are likely to cause the faucet to make some undesirable noise. Also, nobody wants a squeaking sound every time they turn on the faucet.
Faucet Handle
It would be best if you also are careful while fixing or attaching the faucet’s handle. Inadequate installation of the handle can lead to unwanted noises. Also, if you do not install it properly, you might find it difficult when you turn the faucet on or off. The handle might also loosen over time and fall off.
A decrease in Faucet’s Durability
The improper installation of kitchen faucets can shorten its durability. If your faucet is not installed precisely, but you continue to use it, this may damage certain parts of the faucet such as the valve seats, aerator, handle, spout, hose, etc.
Some parts can be easily replaced. But this affects the whole performance of the faucet and you are left with no option but to replace the entire faucet.
Solutions
Instruction Manual
When you buy a faucet, an instruction manual probably comes with it. Before installing or securing any parts of the faucet, make sure to go through the instructions carefully. If there are no instructions given, you can Google it or watch tutorials on YouTube and learn how to install a faucet properly.
To fix loose parts
You can smoothly fix this issue on your own without the help of a professional. You can disassemble certain parts and re-fix them. If you find some parts are loose, you can tighten them with the help of a wrench or pliers. Also, if you need to tighten any nut, you can do this by turning it in a clockwise direction.
While some parts consist of a nut, others might include screws. So depending on the type of faucet you have, pick the required tool, and fixing a loose part will be as easy as pie.
Fixing the Noise
For fixing the noise coming out of faucets, you need to first figure out the noise’s source. The sound might probably arise from the faucet’s handle, hose, aerator, etc. For this, there are some tips you can try before replacing the entire faucet or calling a plumber.
If the screeching sound arises from parts that are tightly fixed, you can try loosening them. Or you can apply some lubricating oil on certain parts.
Professional Help
Calling the plumber to fix your faucet issues will cost you some amount of money. However, this is the best solution if nothing you do seems to correct the problem. Even at the time of installation, if you aren’t sure of what you are doing, then calling the plumber is the best option. This way, you can ensure that your faucet is installed correctly.
Conclusion
Faucets are one of the essential parts of kitchens and bathrooms. Especially in a kitchen, you regularly use water from the tap for various purposes. For this reason, you need to keep a check on your faucets and also ensure their proper installation.
If your faucets are poorly installed, you are left with almost no option but to reinstall them. This is why it is best suggested to prevent such situations from the start. Installing faucets is not a very difficult job, but you need to read the instructions carefully before starting your work.
If you are not at all confident with your skills of installing a kitchen faucet, you might want to contact a plumber to get the job done for you. We have many other articles related to Kitchen Problems and we try provide the best solutions.
References
https://www.familyhandyman.com/plumbing/faucet-repair/how-to-replace-a-kitchen-faucet/